Rushton Princess

A hand-built canoe, ready to sail

A paddleable sailing canoe for use by one or two people, based on J.H Rushton’s Princess model, built using modern timber construction.

Measurements

Canoe

LOA:15′ 8″
Beam:32″
Sail area:45+20= 65 sq ft
Hull weight:80 lb approx

Construction

Hull & Deck:4mm marine ply
Keel, Stem & Sternpost:Mahogany
Rail, coaming & trim:Ash
Finish:Epoxy + 2 pack polyurethane
Mast & Spars:Sitka Spruce / Cedar
Sails (by James Lawrence):Cream Terylene

Price (£)

Not currently available to buy
Terms: F.O.B Bristol UK

Double Paddles

Length:9′ max (exact length to suit purchaser)
weight:2.75 lb (approx)
Parts:2
Joint:“Switchlok” variable feathering joint
Shaft: Sitka spruce
Blades:Cedar

Optional extra (only available with Canoe)


Plans for sale to build your own canoe

A full set of drawings showing the hull lines, full size stem, sternpost and construction mould outlines are available to purchase. Full construction details and notes for the hull and rig come together with a sail plan. These will enable you to build my version of J.H Rushton’s Princess model using glued clinker ply construction. You will require five sheets of good quality marine plywood . You will also need care, time, space and some basic woodworking ability, but it might still  be worth considering this design, even if it is your first boatbuilding project.

Price (£)

One full set of prints (15 sheets)
£90 + postage


Rushton Princess Canoe Designs
Scale




NoTitleScaleSize
01MouldsFull SizeOversize A1 39″x24″
02SternFull SizeA1
03SternpostFull SizeA1
04BulkheadsFull SizeOversize A1 39″x24″
05Hull & Deck Plan1:8A1
06Hull Elevation1:8A1
07Centreboard caseFull SizeA1
08CentrebaordFull SizeOversize A1 39″x24″
09Cruising Rig1:8A1
10Sails1:8A1
11RudderFull SizeOversize A1 39″x24″
12Rudder Pintels & GudgeonsFull SizeA3
13TillerAs notedA3
14TabernacleFull SizeA3
15Stainless plates for tabernacleFull SizeA3
08
06
03
14
09